Breadcrumbs

Tech Help 390 topics

Got a question about maintaining, repairing, or operating your plane? Look here....

PLEASE NOTE - Any advice given on this forum is meant to broaden your knowledge based on the experiences of others. No advice here is intended to solve ANY specific problem with ANY airplane! Take the advice here and discuss it with your A&P. Remember, no one on this forum is going to sign your log book! The information you get here can make you smarter and perhaps lead you and your mechanic toward a solution to a problem, but in the end, you are the owner and the mechanic is putting his name in the log. If a suggestion or recommendation from this forum does not work out, please do not blame the poster on this forum! Advice is given sight unseen, based on information provided. Only you and your mechanic are actually looking at the airplane! All that said, ideas may be freely give with this disclaimer in mind!
Category
This is for Alon/M10 specific topics. If the topic is at all general, please move it the General Tech Help Category

Moderators: Super User, Larry Snyder, Chris Schuldt
Re: Pre-buy inspection help in Okl ...
by Matt Gunsch
09 Jul 2020 15:32
This category is for things specific to the earlier Ercoupe/Forney's which are different in many ways than the ALon/M10's.

However, if you have something of general interest, please post it there.

Moderators: Super User, Larry Snyder, Chris Schuldt
Re: Fuel indicator, floating, on 4 ...
by Ken Thompson
11 Jul 2020 23:21

General 272 topics

Most all tech help requests should go here as they're likely to apply to all Coupes. However, if you have a specific item for Ercoupe/Forney's or ALon/M10's please put it there.

Moderators: Super User, Larry Snyder, Chris Schuldt
Re: Trim cable
by Ronald Raty
20 Jun 2020 22:20
Subject Replies / Views Last Post
Topic started 18 Aug 2019 16:46, by David Smith
Last Post 02 Jul 2020 13:34
by Matt Gunsch
Replies:14
Views:1337
Last Post by Matt Gunsch
02 Jul 2020 13:34
Topic started 13 May 2020 22:02, by Ken Nicholls
Last Post 14 May 2020 09:22
by John Jones
Replies:1
Views:287
Last Post by John Jones
14 May 2020 09:22
Topic started 06 May 2020 20:32, by Kenny Howell
Last Post 07 May 2020 02:52
by Edward Moore
Replies:1
Views:333
Last Post by Edward Moore
07 May 2020 02:52
Topic started 07 Mar 2020 15:39, by Thomas Ryan
Last Post 05 Apr 2020 21:37
by Robert Regester
Replies:2
Views:636
Last Post by Robert Regester
05 Apr 2020 21:37
Topic started 10 Mar 2020 12:51, by Thomas Ryan
Last Post 10 Mar 2020 21:33
by Ronald Raty
Replies:3
Views:624
Last Post by Ronald Raty
10 Mar 2020 21:33
Topic started 17 Feb 2020 19:19, by Thomas Ryan
Last Post 18 Feb 2020 21:41
by Ronald Raty
Replies:1
Views:693
Last Post by Ronald Raty
18 Feb 2020 21:41
Topic started 11 Feb 2020 19:03, by Thomas Ryan
Last Post 11 Feb 2020 20:22
by Gale York
Replies:1
Views:648
Last Post by Gale York
11 Feb 2020 20:22
Topic started 11 Feb 2020 19:46, by Thomas Ryan
Last Post 11 Feb 2020 20:18
by Matt Gunsch
Replies:1
Views:608
Last Post by Matt Gunsch
11 Feb 2020 20:18
Topic started 08 Feb 2020 06:04, by Thomas Ryan
Last Post 08 Feb 2020 12:29
by Ronald Raty
Replies:1
Views:644
Last Post by Ronald Raty
08 Feb 2020 12:29
Topic started 03 Jan 2020 13:21, by Bob Thompson
Last Post 04 Jan 2020 06:51
by Bob Thompson
Replies:2
Views:799
Last Post by Bob Thompson
04 Jan 2020 06:51
Topic started 16 Nov 2019 11:39, by james gouin
Last Post 16 Nov 2019 11:39
by james gouin
Replies:0
Views:908
Last Post by james gouin
16 Nov 2019 11:39
Topic started 08 Sep 2019 12:32, by Steve Westlund
Last Post 12 Sep 2019 12:27
by Steve Westlund
Replies:3
Views:1097
Last Post by Steve Westlund
12 Sep 2019 12:27
Topic started 25 Mar 2019 10:51, by William James
Last Post 08 Sep 2019 20:40
by Steve Westlund
Replies:3
Views:2369
Last Post by Steve Westlund
08 Sep 2019 20:40
Topic started 18 Jul 2018 18:27, by William Bailey
Last Post 07 Aug 2019 20:35
by Matt Gunsch
Replies:4
Views:2634
Last Post by Matt Gunsch
07 Aug 2019 20:35
Topic started 20 Jun 2018 08:59, by Peyton DeHart
Last Post 01 Jul 2019 09:59
by Jack Lawless
Replies:9
Views:5445
Last Post by Jack Lawless
01 Jul 2019 09:59
Topic started 27 May 2019 07:21, by George Sellers
Last Post 27 May 2019 07:21
by George Sellers
Replies:0
Views:1289
Last Post by George Sellers
27 May 2019 07:21
Topic started 12 Mar 2019 10:40, by Super User
Last Post 13 Mar 2019 10:33
by Super User
Replies:2
Views:1509
Last Post by Super User
13 Mar 2019 10:33
Topic started 11 Dec 2018 10:43, by JIM OVERBECK
Last Post 13 Dec 2018 10:03
by Matt Gunsch
Replies:1
Views:1880
Last Post by Matt Gunsch
13 Dec 2018 10:03
Topic started 26 Sep 2018 20:28, by peter stephany
Last Post 08 Oct 2018 20:37
by peter stephany
Replies:4
Views:2444
Last Post by peter stephany
08 Oct 2018 20:37
Topic started 21 Jul 2018 09:30, by Denis Jacques
Last Post 25 Sep 2018 12:31
by Randy Hirsch AP
Replies:6
Views:5327
Last Post by Randy Hirsch AP
25 Sep 2018 12:31
Time to create page: 0.161 seconds
Powered by Kunena Forum