Breadcrumbs

cabin heater muff

  • Don Burquest
  • Topic Author
08 Jul 2019 10:21 #1 by Don Burquest
Replied by Don Burquest on topic cabin heater muff
Thanks, Matt! Makes sense

Don

Please Log in or Create an account to join the conversation.

More
06 Jul 2019 15:27 #2 by Matt Gunsch
Replied by Matt Gunsch on topic cabin heater muff
without the scat tube hooked up, there was nothing to dampen the vibrations,

A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook

Please Log in or Create an account to join the conversation.

  • Don Burquest
  • Topic Author
02 Jul 2019 15:45 #3 by Don Burquest
cabin heater muff was created by Don Burquest
Three years ago I installed a cabin heater muff on the exhaust system to protect the other engine parts from the heat of the exhaust, but I never hooked up the heater itself. The two openings of the muff I left open. Recently I discovered that the outlet that would have led to the heater box had broken off and taken a small piece of the shield itself with it. I am curious as to why this happened. Could it be that without the air flowing through the muff that would have taken place had I run tubing from the opening through the engine baffle, the muff became too hot? Otherwise I am at a loss.

Please Log in or Create an account to join the conversation.

Time to create page: 0.094 seconds
Powered by Kunena Forum