Breadcrumbs

Fuselage skins

More
19 Jun 2025 12:12 #1 by Matt Gunsch
Replied by Matt Gunsch on topic Fuselage skins
Forney part numbers are the same as Erco part numbers but with 415- replaced with F. you can look at the factory drawings on Ercoupe.info to get the part numbers.

A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
The following user(s) said Thank You: Kenneth Crofut

Please Log in or Create an account to join the conversation.

More
15 Jun 2025 06:51 #2 by Raymond Knox
Replied by Raymond Knox on topic Fuselage skins
Vernon Gregory Is definitely the go to person. Univair is just clerks trying to do their best.
The following user(s) said Thank You: Keith Whitcomb

Please Log in or Create an account to join the conversation.

More
11 Jun 2025 12:18 #3 by Frank Hamelly
Replied by Frank Hamelly on topic Fuselage skins
Thank you Keith

Please Log in or Create an account to join the conversation.

More
10 Jun 2025 15:05 #4 by Keith Whitcomb
Replied by Keith Whitcomb on topic Fuselage skins
Univairs customer service sucks. If you call them asking questions they will not have the answer but they will give you Vernon Gregory's phone number.

Skyport sells everything Univair sells plus some stuff they don’t have like used parts.

(803) 360-2061
The following user(s) said Thank You: Raymond Knox

Please Log in or Create an account to join the conversation.

More
10 Jun 2025 14:27 #5 by Frank Hamelly
Replied by Frank Hamelly on topic Fuselage skins
Thank you John. I will give it a try!

Please Log in or Create an account to join the conversation.

More
10 Jun 2025 12:05 #6 by John Jones
Replied by John Jones on topic Fuselage skins
You could try typing in the listed part numbers in the search field on Univair's site if you haven't done so already.

Also, you could check the NTSB accident data base to get an idea of what the event was here www.ntsb.gov/Pages/AviationQueryv2.aspx

John

Please Log in or Create an account to join the conversation.

Time to create page: 0.140 seconds
Powered by Kunena Forum