Breadcrumbs
- You are here:
- Home
- Forum
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Header fuel tank
Header fuel tank
- Robert Gibbons
14 May 2019 05:22 #1
by Robert Gibbons
Replied by Robert Gibbons on topic Header fuel tank
Mine drips.
Please Log in or Create an account to join the conversation.
- Joe Messinger
- Offline
Less
More
- Posts: 13
13 May 2019 23:28 #2
by Joe Messinger
Replied by Joe Messinger on topic Header fuel tank
When I first got my 415C the valve was so stiff I almost couldn't move it and I was losing fuel out of the header. I cut off a short piece of tubing to use as a cheater bar and after a while got it freed up. Now it operates pretty smoothly and fuel loss is almost nonexistent. I close both valves after flight.
Please Log in or Create an account to join the conversation.
- Robert Gibbons
28 Apr 2019 06:51 #3
by Robert Gibbons
Replied by Robert Gibbons on topic Header fuel tank
Mine drips
Please Log in or Create an account to join the conversation.
- Donald Hudson
- Topic Author
21 Mar 2019 09:34 #4
by Donald Hudson
Replied by Donald Hudson on topic Header fuel tank
Good to know. Thanks for the reply.
Please Log in or Create an account to join the conversation.
- Ken Thompson
- Offline
Less
More
- Posts: 136
20 Mar 2019 22:43 #5
by Ken Thompson
Replied by Ken Thompson on topic Header fuel tank
Mine does not drip. When I first got it, it would have a pretty good trickle if I forgot to close the gas valve.
But with a new needle and well lapped seat, no issues anymore. No matter how long I leave the valve open.
But with a new needle and well lapped seat, no issues anymore. No matter how long I leave the valve open.
Please Log in or Create an account to join the conversation.
- Donald Hudson
- Topic Author
20 Mar 2019 22:32 #6
by Donald Hudson
Replied by Donald Hudson on topic Header fuel tank
I recently had an A/P IA tell me if it is repaired correctly it will not drip. Anyone have a Stromberg that does not drip?
Please Log in or Create an account to join the conversation.
Time to create page: 0.138 seconds