Breadcrumbs

Ercoupe gross weight STC possible?

More
12 Jun 2021 10:16 #1 by Larry Snyder
Replied by Larry Snyder on topic Ercoupe gross weight STC possible?
He said he had a C-75 which uses a 73” prop, which is not legal on a C-85

Please Log in or Create an account to join the conversation.

More
12 Jun 2021 09:49 #2 by William James
Replied by William James on topic Ercoupe gross weight STC possible?
Larry , explain the

"new prop" requirement.
I have the 85hp change and a McCauley 7150 prop which I bought new 3 years ago .

Thanks

Bill James

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 13:46 #3 by Bruce Bennett
Replied by Bruce Bennett on topic Ercoupe gross weight STC possible?
Chris, changing the trim tab from the original 3/4" to the 1 3/8" trim tab is all that is necessary on the 75 hp to raise the gross weight to 1320 lbs. Ref Univair STC SA02450CH. Far cheaper than buying a different prop. One can either add a trim tab extension (p/n 415-22031-4) or replace the entire trim tab (p/n 415-22031).

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 08:57 #4 by Larry Snyder
Replied by Larry Snyder on topic Ercoupe gross weight STC possible?
Pretty simple mostly paperwork and a new jet for the carb. Same engine, basically.
The following user(s) said Thank You: Chris Longfellow

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 08:46 #5 by Chris Longfellow
Replied by Chris Longfellow on topic Ercoupe gross weight STC possible?
Thanks Larry, yes that was my next question... how involved is the C-85 conversion (aside from the prop)?
Any articles in Capers or on this site which can help?

Please Log in or Create an account to join the conversation.

More
11 Jun 2021 08:39 #6 by Larry Snyder
Replied by Larry Snyder on topic Ercoupe gross weight STC possible?
It can be done. 1320 with a 75 is a little tricky, imho. You can always upgrade to a C-85. Of course that means a new prop…

Please Log in or Create an account to join the conversation.

Time to create page: 0.091 seconds
Powered by Kunena Forum