Breadcrumbs

Control Wheel’s on Erco 415-D possible?

More
24 May 2024 22:20 - 24 May 2024 22:28 #1 by Warren Hampton
Replied by Warren Hampton on topic Control Wheel’s on Erco 415-D possible?
Yes unless shafts were cut. Some yokes are deeper so they would cut the shafts. Yokes are usually bolted on so you may have to large holes you may need new shafts also.
Last edit: 24 May 2024 22:28 by Warren Hampton. Reason: spacing

Please Log in or Create an account to join the conversation.

More
23 May 2024 15:49 #2 by Brooks McNew
Replied by Brooks McNew on topic Control Wheel’s on Erco 415-D possible?
I believe you will need the wheels and also control shafts that are a different length, but the real resource for this is

Precision Services Inc.
803-360-2061 no calls after 10PM Eastern
This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

More
19 May 2024 13:37 #3 by Torsten Roeder
Control Wheel’s on Erco 415-D possible? was created by Torsten Roeder
Good day everybody,

I recently owned a 1947 Erco 415-D.
Serial Number is 4737.
Is it possible to exchange the two Yooke's for two steering wheels?
(The "DELUXE CONTROL WHEEL" from Univair only goes up to SN 4423)

Thank you for your answers!
Best regards
Torsten

Please Log in or Create an account to join the conversation.

Time to create page: 0.136 seconds
Powered by Kunena Forum