Breadcrumbs

  1. Forum
  3. DIscussions
  5. Tech Help
  7. verticle fin height

verticle fin height

  • Morris Pearson
21 Feb 2021 17:52 #1 by Morris Pearson
Replied by Morris Pearson on topic verticle fin height
75" top of tail to floor with the aircraft setting on a level surface.

Please Log in or Create an account to join the conversation.

More
20 Feb 2021 19:11 #2 by William James
Replied by William James on topic verticle fin height
my takeoff run seems excessive and after liftoff the left wing drops requiring correction. takeoff is almost always at gross (1320) since I have 30 gal tanks and I weigh 200 +

Please Log in or Create an account to join the conversation.

More
20 Feb 2021 18:54 #3 by Larry Snyder
Replied by Larry Snyder on topic verticle fin height
Rather than worry about tail height, put a level on the sill and check for level or close to level. That’s what you’re shooting for.

Please Log in or Create an account to join the conversation.

More
20 Feb 2021 18:49 #4 by William James
verticle fin height was created by William James
what is recommended height from top of verticle fin to the gtound

Please Log in or Create an account to join the conversation.

  1. Forum
  3. DIscussions
  5. Tech Help
  7. verticle fin height
Time to create page: 0.099 seconds
Powered by Kunena Forum