Breadcrumbs
- You are here:
- Home
- Forums
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Trim O Matic
Trim O Matic
- Matt Gunsch
- Offline
Less
More
- Posts: 454
02 Nov 2019 22:18 #1
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Trim O Matic
Here are a few more photos
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
- Matt Gunsch
- Offline
Less
More
- Posts: 454
28 Oct 2019 19:21 - 28 Oct 2019 19:22 #2
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Trim O Matic
it is a aileron trim, it is installed just above the floor on the centerline of the aircraft, SM54 covers the install in a 415C & CD, it is kit SK20
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Last edit: 28 Oct 2019 19:22 by Matt Gunsch.
Please Log in or Create an account to join the conversation.
- Lawson Laslo
28 Oct 2019 07:51 #3
by Lawson Laslo
Replied by Lawson Laslo on topic Trim O Matic
What is trim o matic?
Please Log in or Create an account to join the conversation.
- Matt Gunsch
- Offline
Less
More
- Posts: 454
27 Oct 2019 17:27 #4
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Trim O Matic
mine has it, seems to work better one direction than the other, I am planning on replacing the springs and checking the install, there is a SB covering it, and I have the original drawing.
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
- Dennis Tar
- Topic Author
27 Oct 2019 11:46 #5
by Dennis Tar
Trim O Matic was created by Dennis Tar
Does anyone have trim-o-matic installed and does it work well?
Thank for any info
Dennis
Thank for any info
Dennis
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds