Breadcrumbs

Mount adapters for O-200

More
19 Nov 2024 15:00 #1 by Bill Biggs
Replied by Bill Biggs on topic Mount adapters for O-200
Thanks Randall, if Ed doedn't have a set, this 337 gives me all the information I need to create drawings and manufacture the parts

Please Log in or Create an account to join the conversation.

More
19 Nov 2024 14:52 #2 by Randall Hirsch

Please Log in or Create an account to join the conversation.

More
19 Nov 2024 09:57 #3 by Bill Biggs
Replied by Bill Biggs on topic Mount adapters for O-200
Thanks Ed, I'll be 77 Dec 8. Be great if you have a set. I have a freind with a machineshop business and I may have him make some and put them on Ebay if there is not a current source.
Where is Hartmut database?

Please Log in or Create an account to join the conversation.

More
18 Nov 2024 22:47 #4 by Edward Moore
Replied by Edward Moore on topic Mount adapters for O-200
Bill,
I have the info you need and may- be a set.
It's late and I have an appt in the morning,
I have your phone number and I'll call you next day or two. Be 96 next month!
My field approval 337 is on file in Hartmut database.

Please Log in or Create an account to join the conversation.

More
18 Nov 2024 21:04 #5 by Bill Biggs
Mount adapters for O-200 was created by Bill Biggs
Well, I am back at my Ercoupe after a number of years and need an update.
I plan on using an O-200.
Is there a source for those mount adapters that used to be on Ebay?
If not, does anyone or the club have a set of prints, I have a machine shop in my hangar.
Also a 337 referencing using these adapters would be nice.
Thanks
Bill Biggs
Temple, Tx 

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Powered by Kunena Forum