Breadcrumbs
- You are here:
- Home
- Forums
- DIscussions
- Tech Help
- Carburetors
Carburetors
- Charlie Quandt
- Offline
Less
More
- Posts: 6
17 Aug 2023 11:44 #1
by Charlie Quandt
Replied by Charlie Quandt on topic Carburetors
Thanks for sharing your experience, I'm looking for more information to justify the cost!
But I misspoke about the nature of the valve problem.
What My IA said was that the lead carried by the extra fuel fouls the exhaust valves and guides.
The Marvel is on the engine type certificate, so the swap is a logbook entry.
But I misspoke about the nature of the valve problem.
What My IA said was that the lead carried by the extra fuel fouls the exhaust valves and guides.
The Marvel is on the engine type certificate, so the swap is a logbook entry.
Please Log in or Create an account to join the conversation.
- Larry Snyder
- Offline
Less
More
- Posts: 709
17 Aug 2023 11:06 #2
by Larry Snyder
Replied by Larry Snyder on topic Carburetors
I’ve been flying with a Stromberg for many years without difficulties. You can put a Marvel on if you wish, there’s an STC for that, I believe.
I do not understand how rich running can damage an exhaust valve. Normally it’s running lean that burns up valves.
Anyway, if you have the bucks, putting in a Marvel should be no big deal.
I do not understand how rich running can damage an exhaust valve. Normally it’s running lean that burns up valves.
Anyway, if you have the bucks, putting in a Marvel should be no big deal.
Please Log in or Create an account to join the conversation.
- Charlie Quandt
- Offline
Less
More
- Posts: 6
17 Aug 2023 10:19 #3
by Charlie Quandt
Replied by Charlie Quandt on topic Carburetors
I'd like to re-ask this question.
My C-85, with the Stromberg, runs rich and I'd like to have real mixture control, like for idle cut-off.
Also, my IA says my rich running Stromberg caused my recent exhaust valve failure.
My C-85, with the Stromberg, runs rich and I'd like to have real mixture control, like for idle cut-off.
Also, my IA says my rich running Stromberg caused my recent exhaust valve failure.
Please Log in or Create an account to join the conversation.
- George Sellers
- Topic Author
- Offline
Less
More
- Posts: 42
27 May 2019 07:21 #4
by George Sellers
Carburetors was created by George Sellers
Which carburetor: the Stromberg or the Marvel Schebler do you prefer and why?
Please Log in or Create an account to join the conversation.
Time to create page: 0.138 seconds