Breadcrumbs
- You are here:
- Home
- Forums
- DIscussions
- Tech Help
- Alon/M10 Specific
- Vacuum pump
Vacuum pump
- Gordie Meade
- Offline
Less
More
- Posts: 139
28 Oct 2019 18:02 #1
by Gordie Meade
Replied by Gordie Meade on topic Vacuum pump
The G5 IS STCed into the Mooney. Look under Univair, not Mooney.
Please Log in or Create an account to join the conversation.
- Matt Gunsch
- Offline
Less
More
- Posts: 455
28 Oct 2019 07:42 #2
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Vacuum pump
I guess I am stuck with steam gauges, my vacuum system can't fail, I have 2 venturies
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
- Jason Walleser
- Topic Author
28 Oct 2019 06:52 #3
by Jason Walleser
Replied by Jason Walleser on topic Vacuum pump
I've considered the G5 and other modern options too. I didn't find the M10 on the G5's approved equipment list. The Aspen Avionics E5 caught my eye and lists the M10 in its STC. Still, I haven't really heard much feedback on the E5 from users.
The underlying reason I haven't immediately purchased it is that my family just grew, and I could use another seat. I thought I'd let the next owner choose his upgrades while not selling with inoperable equipment.
The underlying reason I haven't immediately purchased it is that my family just grew, and I could use another seat. I thought I'd let the next owner choose his upgrades while not selling with inoperable equipment.
Please Log in or Create an account to join the conversation.
- John Jones
- Offline
Less
More
- Posts: 183
27 Oct 2019 21:36 #4
by John Jones
Replied by John Jones on topic Vacuum pump
When my vacuum pump fails I'm planning on removing the entire system and putting in a GRT Mini GA with the air data module and magnetometer. Tied into the Aera 660 it will save weight and gain a lot more capability.
Please Log in or Create an account to join the conversation.
- Gordie Meade
- Offline
Less
More
- Posts: 139
27 Oct 2019 20:13 #5
by Gordie Meade
Replied by Gordie Meade on topic Vacuum pump
Or remove the vacuum pump completely and install a Garmin G5. I did and have no more pump failures and a reliable certified horizon (EFIS) that is independent of mechanical issues.
Please Log in or Create an account to join the conversation.
- Matt Gunsch
- Offline
Less
More
- Posts: 455
27 Oct 2019 17:42 #6
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Vacuum pump
Look at Note 3 of the Engine Type certificate, Vacuum Pump, CC rotation, so you are good to go.
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds