Breadcrumbs
- You are here:
- Home
- Forums
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Modify Elevator to Split Elevator
Modify Elevator to Split Elevator
- Clayton Eveland
- Topic Author
24 Aug 2022 13:19 #13
by Clayton Eveland
Replied by Clayton Eveland on topic Modify Elevator to Split Elevator
Let me add one more piece of information. I have access to a large sheet metal shop that can build practical anything. My hope was to find a technical drawing of the split elevator so we could modify my elevator.
Please Log in or Create an account to join the conversation.
- Larry Snyder
- Offline
Less
More
- Posts: 686
24 Aug 2022 10:32 #14
by Larry Snyder
Replied by Larry Snyder on topic Modify Elevator to Split Elevator
I’m pretty sure you need to find a split elevator from a G model to put on. I don’t of anyone making one.
Please Log in or Create an account to join the conversation.
- Clayton Eveland
- Topic Author
24 Aug 2022 10:23 #15
by Clayton Eveland
Modify Elevator to Split Elevator was created by Clayton Eveland
Hello everyone,I am new to the group so I will apologize in advance if this topic has been covered. I did do a search on forum site but came up empty handed.I recently acquired a 1947 Ercoupe 415-D project (sn 3979) with a 85hp engine installed. This will be a full restoration and I am creating a list of STC and other modifications I plan to do on the aircraft.One of these mods will be the installation of a Split Elevator. My question is can my current elevator be cut and modified to a split elevator? Does any one have the drawings or other approved data for the split elevator?Thank you for your help,
Please Log in or Create an account to join the conversation.
Time to create page: 0.096 seconds