Breadcrumbs

  1. Forums
  3. DIscussions
  5. Tech Help
  7. General
  9. Oil sump cooling baffels

Oil sump cooling baffels

More
29 Aug 2024 16:25 #1 by Matt Gunsch
Replied by Matt Gunsch on topic Oil sump cooling baffels
on the C90 the baffles made a big difference on mine, While I was fitting mine I made duplicate parts out of fiberglass for later use if needed.
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook

Please Log in or Create an account to join the conversation.

More
28 Aug 2024 04:33 #2 by Larry Snyder
Replied by Larry Snyder on topic Oil sump cooling baffels
I upgraded my C-75 to a C-85 with the O-200 crankshaft STC in 2006. Careful reading of TCDS 718 led us to believe the sump baffles were not required. I spoke to several experts and they agreed that those baffles do little. I have not had temperature issues with mine. It’s kind of stunning to see how much Univair charges for parts!!

Please Log in or Create an account to join the conversation.

More
27 Aug 2024 21:49 #3 by Morris Pearson
Oil sump cooling baffels was created by Morris Pearson
Anyone have pictures of the oil sump cooling baffels installed on a C85? I have a standard Oil cooler with no oil filter and no oil sump cooling baffels Are the oil sump cooling baffles required or optional? Univair sells a kit but it cost over $1500 and I have never seen one installed.

Please Log in or Create an account to join the conversation.

  1. Forums
  3. DIscussions
  5. Tech Help
  7. General
  9. Oil sump cooling baffels
Time to create page: 0.082 seconds
Powered by Kunena Forum