Breadcrumbs

Brake master cylinder

  • peter stephany
  • Topic Author
08 Oct 2018 20:39 #1 by peter stephany
Replied by peter stephany on topic Brake master cylinder
Thank you, excellent, now on to nose gear strut, any suggestions for overhaul material?

Please Log in or Create an account to join the conversation.

More
07 Oct 2018 13:39 #2 by Ronald Raty
Replied by Ronald Raty on topic Brake master cylinder
Also, if you are rebuilding the master, check this out.
www.ercoupe.info/?n=Main.MasterCylinderOverhaul

Please Log in or Create an account to join the conversation.

More
07 Oct 2018 13:24 #3 by Ronald Raty
Replied by Ronald Raty on topic Brake master cylinder
I looked back through my records, I apparently used these:

master cylinder
AN6227-23 (MS28775-218) O-ring
AN6227-07 (MS28775-012) O-ring
AN6227-16 (MS28775-211) O-ring
MS28775-13 shim

Please Log in or Create an account to join the conversation.

  • peter stephany
  • Topic Author
07 Oct 2018 10:18 #4 by peter stephany
Brake master cylinder was created by peter stephany
Anyone know correct P/N for O rings in original Ercoupe master cylinder?

Please Log in or Create an account to join the conversation.

Time to create page: 0.110 seconds
Powered by Kunena Forum