Breadcrumbs

Tech Help 882 topics

Got a question about maintaining, repairing, or operating your plane? Look here....

PLEASE NOTE - Any advice given on this forum is meant to broaden your knowledge based on the experiences of others. No advice here is intended to solve ANY specific problem with ANY airplane! Take the advice here and discuss it with your A&P. Remember, no one on this forum is going to sign your log book! The information you get here can make you smarter and perhaps lead you and your mechanic toward a solution to a problem, but in the end, you are the owner and the mechanic is putting his name in the log. If a suggestion or recommendation from this forum does not work out, please do not blame the poster on this forum! Advice is given sight unseen, based on information provided. Only you and your mechanic are actually looking at the airplane! All that said, ideas may be freely give with this disclaimer in mind!
Category
This is for Alon/M10 specific topics. If the topic is at all general, please move it the General Tech Help Category
Re: Elevator cable tension
by Warren Hampton
28 Nov 2024 14:34
This category is for things specific to the earlier Ercoupe/Forney's which are different in many ways than the ALon/M10's.

However, if you have something of general interest, please post it there.
Re: Performance comparison C85 vs ...
by Larry Snyder
20 Dec 2024 17:57

General 436 topics

Most all tech help requests should go here as they're likely to apply to all Coupes. However, if you have a specific item for Ercoupe/Forney's or ALon/M10's please put it there.
Re: Need New ELT - Suggestions?
by Matt Gunsch
09 Dec 2024 11:07
Subject Replies / Views Last Post
Topic started 05 Dec 2024 11:14, by Robert CUTTING
Last Post 07 Dec 2024 18:00
by Warren Hampton
Replies:2
Views:161
Last Post by Warren Hampton
07 Dec 2024 18:00
Topic started 18 Nov 2024 21:04, by Bill Biggs
Last Post 19 Nov 2024 15:00
by Bill Biggs
Replies:4
Views:269
Last Post by Bill Biggs
19 Nov 2024 15:00
Topic started 05 Oct 2024 10:53, by Nick Arquer
Last Post 12 Nov 2024 21:17
by Matt Gunsch
Replies:10
Views:1110
Last Post by Matt Gunsch
12 Nov 2024 21:17
Topic started 02 Nov 2024 09:18, by Jim Kadel
Last Post 02 Nov 2024 17:36
by Keith Whitcomb
Replies:2
Views:261
Last Post by Keith Whitcomb
02 Nov 2024 17:36
Topic started 06 Jul 2024 13:55, by Brian Croxford
Last Post 06 Oct 2024 19:10
by Raymond Knox
Replies:12
Views:1574
Last Post by Raymond Knox
06 Oct 2024 19:10
Topic started 06 Aug 2024 17:25, by Diane Bancroft
Last Post 07 Aug 2024 17:19
by Larry Snyder
Replies:4
Views:518
Last Post by Larry Snyder
07 Aug 2024 17:19
Topic started 29 Jul 2024 20:13, by Luis Pru
Last Post 30 Jul 2024 23:20
by Edward Moore
Replies:2
Views:511
Last Post by Edward Moore
30 Jul 2024 23:20
Topic started 11 Nov 2023 10:28, by Greg Harris
Last Post 02 May 2024 23:16
by Greg Harris
Replies:16
Views:3693
Last Post by Greg Harris
02 May 2024 23:16
Topic started 01 Apr 2024 11:43, by Don Wither
Last Post 01 Apr 2024 11:51
by Larry Snyder
Replies:1
Views:720
Last Post by Larry Snyder
01 Apr 2024 11:51
Topic started 23 Feb 2024 15:41, by Morris Pearson
Last Post 24 Feb 2024 18:01
by Matt Gunsch
Replies:2
Views:883
Last Post by Matt Gunsch
24 Feb 2024 18:01
Topic started 20 Jan 2024 14:00, by Harold Johnson
Last Post 28 Jan 2024 21:06
by Raymond Knox
Replies:12
Views:3162
Last Post by Raymond Knox
28 Jan 2024 21:06
Topic started 07 Dec 2023 23:22, by Greg Harris
Last Post 11 Dec 2023 23:26
by Greg Harris
Replies:2
Views:906
Last Post by Greg Harris
11 Dec 2023 23:26
Topic started 05 Dec 2023 14:44, by dan ragan
Last Post 05 Dec 2023 21:25
by dan ragan
Replies:3
Views:1031
Last Post by dan ragan
05 Dec 2023 21:25
Topic started 13 Nov 2023 20:10, by William Worley
Last Post 13 Nov 2023 20:10
by William Worley
Replies:0
Views:987
Last Post by William Worley
13 Nov 2023 20:10
Topic started 21 Oct 2023 00:31, by Ron Holmes
Last Post 27 Oct 2023 06:58
by Keith Whitcomb
Replies:1
Views:1172
Last Post by Keith Whitcomb
27 Oct 2023 06:58
Topic started 11 Jun 2023 18:29, by William McCormick
Last Post 10 Sep 2023 20:21
by William McCormick
Replies:2
Views:1197
Last Post by William McCormick
10 Sep 2023 20:21
Topic started 30 Aug 2023 11:13, by Brian Lambert
Last Post 10 Sep 2023 18:01
by Warren Hampton
Replies:1
Views:1089
Last Post by Warren Hampton
10 Sep 2023 18:01
Topic started 27 May 2019 07:21, by George Sellers
Last Post 17 Aug 2023 11:44
by Charlie Quandt
Replies:3
Views:4611
Last Post by Charlie Quandt
17 Aug 2023 11:44
Topic started 10 Jul 2023 18:07, by Brian Lambert
Last Post 10 Jul 2023 19:37
by Matt Gunsch
Replies:1
Views:1128
Last Post by Matt Gunsch
10 Jul 2023 19:37
Topic started 06 Jul 2023 18:09, by William McCormick
Last Post 07 Jul 2023 13:04
by Larry Snyder
Replies:1
Views:1177
Last Post by Larry Snyder
07 Jul 2023 13:04
Time to create page: 0.149 seconds
Powered by Kunena Forum